SOLD INDIVIDUALLY...In ceiling adaption of the IW1002 the electra IC1002 is a high end loudspeaker equipped with an exclusive coaxial driver with W cone and A/MG tweeter for maximum musicality and power handling. Perfect for a quality main system or as a high-end in- ceiling effect speaker. White finish. Description In-Ceiling adaptation of the Focal IW 1002 the In-Ceiling Electra IC 1002 is a high-end hifi loudspeaker equipped with an exclusive coaxial driver with W cone and Al/Mg tweeter for maximum musicality and power-handling. Perfect for a quality main system or as a high-end in-ceiling effect speaker. White finish. Technical specifications Type 2-way In-Ceiling speaker Cut-out dimensions (HxW) Ø 8-11/16" Frame size (HxWxD) Ø10 x 3-3/4" (Ø 253 x 96mm) Depth from wall 3-5/8" Adjustment Tweeter adjustment: - 3dB / 0dB / + 3dB Protection autoreset Polyswitch fuse Drivers 6-1/2" (16.5cm) "W" midbass. 1" (25mm) Al/Mg inverted dome tweeter Net weight 4.16lb (2.1kg) Recommended amplifier power 25 - 150W Crossover frequency 2 600Hz Nominal impedance 8 Ohms Sensitivity (2 83 V/1 m) 88dB Frequency response (+or-3dB) 60Hz - 30.5 kHz  

$479.99

from

SOLD AS A PAIR...Chorus 816 V makes the most of the 2 and a half-way configuration: elevated performance in lower octaves thanks to the combination of woofers working in unison. Up to 30m2. Type: 2 1/2 way bass-reflex floor standing speaker Powerflow. The floorstanding Chorus 816V makes the most of the two-and-a-half-way configuration: elevated performance in lower octaves thanks to the combination of woofers working in unison. Rooms up to 30m2. Technical specifications Type 2-1/2 way bass-reflex floor standing speaker Powerflow. Finish Moka - Natural Drivers 6-1/2" (16.5cm) Polyglass woofer. 6-1/2" (16.5cm) Polyglass mid-bass. 1" (25mm) TNV Al/Mg inverted dome tweeter. Frequency response (+or-3dB) 47Hz - 28kHz Low frequency point 39Hz Sensitivity (2 83 V/1 m) 91.5dB Nominal impedance 8 Ohms Minimum impedance 4.3 Ohms Crossover frequency 300Hz / 3 000Hz Recommended amplifier power 40 - 200W Dimensions (HxWxD) 39-5/16 x 11-1/8 x 14-3/4" Net weight 49.5Ibs (22.5kg)  

$1699.99

from

SOLD AS A PAIR... This good-looking two-way speaker the only equipped with a 7"(18cm) woofer has the true spirit of the legendary DB 19: powerful bass a big speaker for a guaranteed rock'n'roll sound. Technical specifications Type 2-way bass-reflex bookshelf speaker. Finish Ebony - Natural Drivers 7"(18cm) Polyglass mid-bass. 1"(25mm) TNV Al/Mg inverted dome tweeter. Frequency response (+or-3dB) 50Hz - 28kHz Low frequency point 41Hz Sensitivity (2 83 V/1 m) 92dB Nominal impedance 8 Ohms Minimum impedance 4.2 Ohms Crossover frequency 3 000Hz Recommended amplifier power 25 - 175W Dimensions (HxWxD) 17-5/8 x 9-1/3 x 13-1/8" Net weight 22.2Ibs (10.1kg)  

$949.99

from

SOLD AS A PAIR...Very compact this bipolar loudspeaker was designed with the same obsessive attention to coherence as the other Profile loudspeakers. The dispersion very large and homogeneous gives the speaker the rare capability to fill the listening room. 3D surround effects are guarantied. Type: 2-way sealed bipolar effect speaker. Description Very compact this bipolar surround loudspeaker was designed with the same obsessive attention to coherence as the other Profile loudspeakers. The dispersion very large and homogeneous gives the speaker the rare capability to fill the listening room. 3D surround effects are guarantied. Type: 2-way sealed bipolar effect speaker. Technical specifications Type 2-way sealed bipolar effect speaker. Finish Black finish. Drivers Two 6 -1/2" (16.5cm) "W" woofers. Two 1" (25mm) Al/Mg inverted dome tweeter. Frequency response (+or-3dB) 75Hz - 30.5kHz Low frequency point 61Hz Sensitivity (2 83 V/1 m) 91dB Nominal impedance 8 Ohms Minimum impedance 5.2 Ohms Crossover frequency 2 600Hz Recommended amplifier power 40 - 200W Dimensions (HxWxD) 11-5/8 x 15-7/8 x 7-5/8" (295x403x194mm) Net weight 19.4Ibs(8.8kg)  

$1574.99

from

Sold Individually... Order Stock # ASM56301 • Flangeless Appearance • Small Footprint In-Ceiling • 3” Full Range Aluminum Cone Woofer • Timbre-Matched to All Three Series Speakers • Sensitivity: 86dB 1W/1m • Power Handling: 40 Watts • Impedance: 8 Ohms • Frequency Response: 80Hz - 16kHz • Diameter x Depth: 5-3/8" x 3-1/4" (137 mm x 83 mm) • Cut-Out Diameter: 4-1/4" (108 mm) “Speakercraft” is a registered trademark of Speakercraft Inc. for use by its authorized dealers. Digital Craze is not an authorized dealer of Speakercraft® products. As such Speakercraft may not provide a factory warranty on products carrying the Speakercraft name sold through this site. However Digital Craze offers a warranty EQUIVALENT to the manufacturer’s warranty AT NO CHARGE on all products we sell.  

$119.99

from

Sold Individually... Presenting an entirely new range of in-wall loudspeakers that combine Revel’s best-in-class acoustics with a patented tool-less installation mechanism and a sleek new look that integrates easily into any décor. 7" Micro-Ceramic Composite (MCC) Cone Cast-Aluminum Frame high output Woofer 1" Aluminum Dome HIGH OUTPUT tweeter w/ Waveguide HF Level & Tilt Control LF Boundary Compensation & Listener Axis Controls Advanced High Order Crossover Network Cast Aluminum Baffle w/ Multi-point Spring Loaded Clamping Mechanisim Mounting Depth: 3.7" (9.4 cm) Includes Zero-bezel Magnetic Grille  

$999.99

from

SOLD AS A PAIR...The Chorus 726 V is the accessible high-end loudspeaker incarnate: technically very advanced its 3-way design marries the exceptional definition of the medium with the power of the two 6-1/2"(16.5cm) woofers. A great sound ample generous and more... up to 40m2. Type: 3-way bass-reflex floor standing speaker. The floorstanding loudspeakers Chorus 726 V is the accessible high-end loudspeaker incarnate: technically very advanced its 3-way design marries the exceptional definition of the medium with the power of the two 6-1/2"(16.5cm) woofers. A great sound ample generous and more... up to 40m2. Technical specifications Type 3-way bass-reflex floor standing speaker Finish Light Walnut Wengé Black Ash Havana Drivers 2 x 6-1/2" (16.5cm) Polyglass woofers 6-1/2" (16.5cm) Polyglass mid-range 1" (25mm) TNV Al/Mg inverted dome tweeter Frequency response (+or-3dB) 49Hz - 28kHz Low frequency point 39Hz Sensitivity (2 83 V/1 m) 91.5dB Nominal impedance 8 Ohms Minimum impedance 2.9 Ohms Crossover frequency 300Hz / 3 000Hz Recommended amplifier power 40 - 250W Dimensions (HxWxD) 39 x 8-3/4 x 14-3/4" Net weight 51.7Ibs (23.5kg)  

$1429.99

from

Sold Individually... FEATURES Integrated Woofer/baffle Design Delivers Greater Low Frequency Response By Employing A 7" Woofer Where Competitive Models Of The Same Outer Size Employ 6 1/2" Woofers Interlaced Glass Fiber Cone Is Lightweight Yet Extremely Rigid For Deep Powerful Bass Response Butyl Rubber Surround Damps Resonance And Provides Exceptional Durability 1" Nano-coated IMPACT (Improved Aluminum Ceramic Technology) Dome Tweeter Utilizes A Vapor Deposited Coating To Move Any Ringing Frequencies Outside The Range Of Hearing For Ultra-detailed High Frequencies Proprietary Bridge-mounted Tweeter-adjustment Mechanism Focuses The High Frequency Sound In Any Direction Up To 20° Without Diffraction 3 Position Tweeter Level Control Provides For Precise Matching To Room Acoustics Magnetically Attached Rust-resistant Grille Covers Install Quickly And Provide A Low Profile Look Weather Resistant Construction Reduces Installation Limitations And Provides Unique Solutions In Moist Environments Or Outdoors Under Eaves SPECIFICATIONS Frequency Response: 48Hz To 21kHz +/-3dB Impedance: 8 Ohm Nominal; 6 Ohm Minimum Recommended Amplifier Power: 10 To 160 Watts Frame Dimensions: 9 7/8" (25.1 Cm) Hole Cutout Dimensions: 8 1/2" (21.6 Cm) Depth Behind Ceiling (5/8" Drywall): 3 3/4" (9.5 Cm) Shipping Weight: 5.8 Lbs (2.6 Kg) Our company is not an authorized dealer of this product but does maintain a stocking inventory of this product. As such the manufacturer reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty on all products sold at no extra charge and everything will be warrantied by our store equivalent to the manufacturers warranty.  

$189.98

from

Sold Individually... KEF's full range Ci130.2FS and Ci130.2FR are serious speakers at an affordable price. The Ci130.2 is well suited for the high quality music and speech reinforcement applications where good hi-fi performance is required. Sharing KEF's versatility of flush mounting square speakers in walls or round speakers in ceiling with ease of installation the speaker is at home either installed indoors even in bathrooms or outside (under eaves). There is virtually no limit to the design possibilities that these budget speakers can offer. If you want the custom installation benefits without breaking the bank look to the Ci130.2FS and Ci130.2FR. Specifications: Amplifier Power Range 10-50 watts Dimensions (HxWxD) in mm 180x180x80 Frequency Range at 3dB 80Hz to 27kHz Impedance 8 Ohms Nominal Maximum Power Handling 104 dB Sensitivity SPL/m/2.83V 87dB The word mark KEF® is a registered trademark of KEF® America (GP ACOUSTICS LTD.). The images of KEF® equipment components and/or accessories depicted above may be copyrightable subject matter of KEF®. Our company is not an authorized dealer of KEF® products but does maintain a stocking inventory of that company's products. As such KEF America® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty on all products sold.  

$109.99

from

SOLD AS A PAIR...The smallest of the Chorus V floorstanders exhibits a fine form with a minimal footprint. Elaborate yet balanced the Chorus 714 V benefits from two 5" (14cm) woofers in a 2-and-a-half way configuration to deliver solid bass. Ideal for rooms of 15 to 25m2. Type: 2 1/2 way bass-reflex floor standing speaker. The smallest of the Chorus V floorstanders exhibits a fine form with a minimal footprint. Elaborate yet balanced the Chorus 714 V benefits from two 5.5" (14cm) woofers in a 2-and-a-half way configuration to deliver solid bass. Ideal for rooms of 15 to 25m2. Type: 2 1/2 way bass-reflex floor standing speaker. Technical specifications Type 2-1/2 way bass-reflex floorstanding speaker Finish Light Walnut Wengé Black Ash Havana Drivers 5-1/2" (14cm) Polyglass woofer 5" (14cm) Polyglass mid-bass 1" (25mm) TNV Al/Mg inverted dome tweeter Frequency response (+or-3dB) 52Hz - 28kHz Low frequency point 43Hz Sensitivity (2 83 V/1 m) 91dB Nominal impedance 8 Ohms Minimum impedance 4.2 Ohms Crossover frequency 300Hz / 3 000Hz Recommended amplifier power 25 - 150W Dimensions (HxWxD) 35-7/16 x 8 x 11-5/8" Net weight 35.6Ibs (16kg)  

$949.99

from

Sold Individually... Presenting an entirely new range of in-wall loudspeakers that combine Revel’s best-in-class acoustics with a patented tool-less installation mechanism and a sleek new look that integrates easily into any décor. 9" Micro-Ceramic Composite (MCC) Cone Cast-Aluminum Frame high output Woofer 1" Aluminum Dome high output tweeter w/ Waveguide 3-position HF Level & Tilt Control LF Boundary Compensation & Listener Axis Controls Advanced High Order Crossover Network Cast Aluminum Baffle w/ Multi point Spring Loaded Clamping Mechanism Mounting Depth: 3.7" (9.4 cm) Includes Zero-bezel Magnetic Grille  

$1299.99

from

Sold Individually... Presenting an entirely new range of in-ceiling loudspeakers that combine Revel’s best-in-class acoustics with a patented tool-less installation mechanism and a sleek new look that integrates easily into any décor. Description 6-1/2" In-ceiling Loudspeaker 3-position HF LEVEL CONTROL High Frequency Extension (-10dB) 30k Low Frequency Extension 40 Power Handling 65W (EIA RS426B) Recommended Amplifier Power 10-120W Sensitivity (2.83V @ 1m) 87dB Nominal Impedance 8 Ohms Crossover Frequencies (Hz) 2.2k High-frequency Drive Components 1" Aluminum Dome Tweeter Low-frequency Drive Components 6-1/2" Micro-ceramic Composite Cone Woofer with Cast Polymer Frame Input Connections Gold-plated Push Terminals Features Low-diffraction Offset Tweeter Pod Zero-bezel Grilles Mounting Tool-free Height 9.1" (23.1cm) Width 9.1" (23.1cm) Depth 4.8" (12.1cm) Weight 1.6lb (0.75kg) Included Accessories Both Round and Square Magnetically-attached Grilles Optional Accessories Pre-construction Bracket Fire-rated Back Box  

$369.99

from

Sold Individually... The perfect speaker solution for 50-inch and larger flat panel TVs Two high-definition Balanced Double Surround System (BDSS)5-1/4 inch drivers pressure-coupled to two 5 x 8 inch racetrack-shaped planar Low-Bass Radiators for a total bass radiating surface greater than that of a 12 inch woofer Hand-polished gloss aircraft-grade extruded aluminum enclosure with proprietary damping technologies to ensure total rigidity and perfectly accurate sound 1 inch (25mm) Ceramic–coated Pure Aluminum dome tweeter with an acoustically contoured faceplate for unequaled high frequency extension detail and smoothness Wall mounting bracket included Dimensions | Metric :6-1/16" W x 4-3/8" D x 34-1/2" H | 15.4 x 11.1 x 87.6 cm Impedance :Compatible with 8 Ohms outputs A/V Receiver Crossover Setting :60 Hz Frequency Response :31 Hz – 30 kHz Sensitivity :93 dB Recommended Associated Amplifier Power :10 – 300 watts Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" BDSS bass/midrange drivers; Two 5x8" pressure coupled bass radiators Inputs :One pair of 5 way binding posts Enclosure :Aircraft grade extruded aluminum Available Finishes :Gloss Black Accessories :Wall bracket; Leveler Foot Mounting Options :Horizontally: On Shelf with included leveling foot and bracket; On wall with included wall mounting bracket. Vertically: On wall only with included flush mounting bracket Weight | Metric :21 lbs | 9.5 kg  

$699.99

from

SOLD INDIVIDUALLY...This active remotely controlled subwoofer starts with the same motor as the Electra SW 1000 Be: 24 bit DSP processor 13" (33cm) "W" woofer and BASH¨ amplifier. The power of its impact is reference-quality even at unbelievable pressure levels. Type: Active bass-reflex subwoofer. Description This active remotely controlled Profile subwoofer starts with the same motor as the Electra subwoofer SW 1000 Be: 24 bit DSP processor 13" (33cm) "W" woofer and BASH® amplifier. The power of its impact is reference-quality even at unbelievable pressure levels. Type: Active bass-reflex subwoofer. Technical specifications Type Active bass-reflex subwoofer Finish Diamond Black Drivers 13" (33cm) "W" woofer. Frequency response (+or-3dB) 27Hz - 150Hz Low frequency point 23Hz Recommended amplifier power 500W (700W max.) BASH amplifier. Subwoofer features Adjustable LPF: 50Hz to 150Hz (24dB/oct.) 24dB/oct. adjustable subsonic filter adjustable phase Boost mode Night mode 3 user memories LFe/Stereo/Digital enter. Dimensions (HxWxD) 20 x 19-1/4 x 15" (510x488x380mm) Net weight 59.4Ibs (27kg)  

$2599.99

from

Sold Individually... FEATURES Integrated Woofer/baffle Design Delivers Greater Low Frequency Response By Employing A 7" Woofer Where Competitive Models Of The Same Outer Size Employ 6 1/2" Woofers Glass Fiber Woofer Cone Is Extremely Rigid To Reduce Breakup Lower Distortion And Provide Enhanced Bass Response Butyl Rubber Surround Damps Resonance And Provides Exceptional Durability 1" Fluid-cooled Teteron® Dome Tweeter Offers Ultra-wide Dispersion And Silky-smooth High-frequency Response Proprietary Bridge-mounted Tweeter-adjustment Mechanism Focuses The High Frequency Sound In Any Direction Up To 20° Without Diffraction Magnetically Attached Rust-resistant Grille Covers Install Quickly And Provide A Low Profile Look Weather Resistant Construction Reduces Installation Limitations And Provides Unique Solutions In Moist Environments Or Outdoors Under Eaves SPECIFICATIONS Frequency Response: 52Hz To 21kHz +/-3dB Impedance: 8 Ohm Nominal; 6 Ohm Minimum Recommended Amplifier Power: 10 To 130 Watts Frame Dimensions: 9 7/8" (25.1 Cm) Hole Cutout Dimensions: 8 1/2" (21.6 Cm) Depth Behind Ceiling (5/8" Drywall): 3 3/4" (9.5 Cm) Shipping Weight: 5.4 Lbs (2.4 Kg) Our company is not an authorized dealer of this product but does maintain a stocking inventory of this product. As such the manufacturer reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty on all products sold at no extra charge and everything will be warrantied by our store equivalent to the manufacturers warranty.  

$144.98

from

Sold Individually... Inspired by our ultra-high-end electrostatic loudspeakers Motion FX features dual Folded Motion tweeters in a wide dispersion configuration powerful bass and folded reflex port technology in a compact affordable package. Key to Motion FX’s performance is the lightning fast response of the tweeter’s light-weight diaphragm combined with a large surface area (8-times that of a typical one-inch dome tweeter) which together achieve a smooth refined sound with stunning dynamic range and jaw-dropping clarity. Frequency Response 74–25 000 Hz ± 3dB Sensitivity 91 dB/2.83 volts/meter Impedance 4 Ohms. Compatible with 4 6 or 8 Ohm rated amplifiers. Crossover Frequency 4500 Hz High Frequency Driver Two 1 x 1.4" (2.6 x 3.6 cm) Folded Motion Transducer with 5.25 x 1.75" (13.3 x 4.4 cm) diaphragm. Mid/Low Freq. Drivers 5.25" (13.3 cm) paper cone. Folded Bass Reflex Port Recommended Amp 20–160 watts Weight 9.5 lbs. (4.4 kg) Size (HxWxD) 11.1 x 12 x 6" (28.2 x 30.5 x 15.2 cm) The word mark MARTIN LOGAN® is a registered trademark of Martin Logan® Lawrence KS. The images of Martin Logan® equipment components and/or accessories depicted above may be copyrightable subject matter of Martin Logan®. Our company is not an authorized dealer of Martin Logan® products but does maintain a stocking inventory of that company's products. As such Martin Logan® reserves the right not to honor its factory warranty on this product. However our store offers an equivalent warranty on all products sold.  

$309.99

from

Sold per Pair... Order Stock # ASM87620 6 1/2" Glass Composite Cone Woofer with Filleted Rubber Surround & Phase Plug Pivoting 1" Silk Dome Tweeter Front-Mounted Buttons Allow for up to ±3dB of Treble Adjustment Timbre-Matched to All Two Series Speakers Sensitivity: 92dB 1W/1m Power Handling: 120 Watts Impedance: 8 Ohms Frequency Response: 45Hz - 20kHz Dimensions: (H x W x D) 12 ¼" x 8 3/16" x 3 3/16" (311 mm x 208 mm x 81 mm) Wall Cut-Out Dimensions: (H x W) 10 9/16" x 6 9/16" (268 mm x 167 mm) “Speakercraft” is a registered trademark of Speakercraft Inc. for use by its authorized dealers. Digital Craze is not an authorized dealer of Speakercraft® products. As such Speakercraft may not provide a factory warranty on products carrying the Speakercraft name sold through this site. However Digital Craze offers a warranty EQUIVALENT to the manufacturer’s warranty AT NO CHARGE on all products we sell.  

$269.99

from

Sold Individually... Presenting an entirely new range of in-ceiling loudspeakers that combine Revel’s best-in-class acoustics with a patented tool-less installation mechanism and a sleek new look that integrates easily into any décor. Description 6-1/2" In-ceiling Loudspeaker 3-position HF LEVEL CONTROL High Frequency Extension (-10dB) 30k Low Frequency Extension 40 Power Handling 65W (EIA RS426B) Recommended Amplifier Power 10-120W Sensitivity (2.83V @ 1m) 87dB Nominal Impedance 8 Ohms Crossover Frequencies (Hz) 2.2k High-frequency Drive Components 1" Aluminum Dome Tweeter Low-frequency Drive Components 6-1/2" Micro-ceramic Composite Cone Woofer with Cast Polymer Frame Input Connections Gold-plated Push Terminals Features Low-diffraction Offset Tweeter Pod Zero-bezel Grilles Mounting Tool-free Height 9.1" (23.1cm) Width 9.1" (23.1cm) Depth 4.8" (12.1cm) Weight 1.6lb (0.75kg) Included Accessories Both Round and Square Magnetically-attached Grilles Optional Accessories Pre-construction Bracket Fire-rated Back Box  

$239.99

from

Sold Individually... Presenting an entirely new range of in-ceiling loudspeakers that combine Revel’s best-in-class acoustics with a patented tool-less installation mechanism and a sleek new look that integrates easily into any décor. All models feature Revel’s low-distortion motor structure designs with aluminum tweeters and Micro Ceramic Composite (MCC) cone woofers for true audiophilegrade performance and easy timbre-matching to Revel floorstanding monitor and center channel loudspeakers. Installation is quick and easy with a patented installation mechanism that doesn’t require any tools for clamping to the drywall and accommodates a wide variety of wall thicknesses and construction types. For the finishing touch frameless grilles attach magnetically giving the loudspeaker an elegant yet unobtrusive look. All ten in-ceiling loudspeaker models include both round and square grilles to provide a perfect match for existing ceiling fixtures and lighting. With this new in-ceiling loudspeaker product line there is a loudspeaker to suit any application from background audio to high-end multichannel home theater installations proving once again that Revel builds the World’s Finest Loudspeakers.  

$359.99

from

SOLD PER PAIR... The M12 monitor loudspeaker delivers outstanding timbral accuracy over a remarkably wide frequency range that belies its diminutive cabinet size. The 6_-inch woofer features a rigid Organic Ceramic Composite (OCC) cone that is coupled to the die-cast frame via a high excursion butyl rubber surround and includes a flat spider that further aids linearity and reduces distortion. Utilizing an oversized ceramic magnet the M12 achieves impressive low frequency response all the way down to 41 Hz (-10dB). The M12Õs 1-inch OCC dome tweeter is mated with our proprietary ÒConstant Acoustic ImpedanceÓ waveguide technology which provides optimized dispersion over a wide listening area and reduces distortion and compression at elevated listening levels. This carefully optimized dispersion precisely matches the 6_-inch woofer resulting in unprecedented seamlessness and coherency. A powerful yet compact neodymium motor system maximizes sensitivity while Ferrofluid magnetic cooling fluid contributes to realistic musical dynamics. The steep slope high order crossover features ultra-tight 3% precision tolerance components assuring outstanding consistency and matching with the design reference standard. The M12 monitor loudspeaker is magnetically shielded which allows placement near a CRT monitor in a home theater system. Constructed of thick MDF and internally braced for added rigidity the M12 cabinet is equipped with threaded inserts on the bottom panel to accommodate screws for secure fastening to the optional pedestal stands. Gold plated binding posts can accept heavy gauge speaker cables and connectors.  

$549.99

from